Please note : These are not usually kept in our stores and must be specially ordered from overseas meaning extended lead times. In order to avoid confusion please call our stores to enquire about this product.

Transform your garden patio or pathway with the affordable elegance of Pavestone Classic Anthracite Porcelain Paving Tiles. Made from hard-wearing porcelain, these tiles have a slip-resistant surface and are resistant to seasonal weather changes, acid and alkali chemicals, and colour fading. Available in three sizes and three popular colours, they are the perfect choice for adding a touch of class to any outdoor space.

Choose between three Classic Porcelain Formats:

1200mm x 600mm x 20mm

900mm x 600mmx 20mm

600mm x 600mm x 20mm

R11 Anti-slip Finish

2.8 tiles cover approximately 1.0m2

64 tiles (1 pallet) cover approximately 23.0m2

Dimensions are "nominal" and may vary by up to 5mm, with a typical variance of +/-2mm within each batch

Always check batch number when laying for minimal variation in tile sizes

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering.

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.